NSN 5340-01-485-8484 · NIIN 014858484 · FSC 5340
NO DASHES 5340014858484
In Stock
CLEVIS,ROD END
Hardware, Commercial
Application: AFT SUPPORT
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.391 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 2.245 AND INCHES MAXIMUM 2.255 |
| ABPZ | END RADIUS | INCHES NOMINAL 0.060 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 2.245 AND INCHES MAXIMUM 2.255 |
| AGAV | END ITEM IDENTIFICATION | AFT SUPPORT |
| AJSD | FORK SPAN WIDTH | INCHES MINIMUM 0.505 AND INCHES MAXIMUM 0.515 |
| AKYE | SECURING PIN HOLE DIAMETER | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.391 |
| AKYH | DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END | INCHES NOMINAL 0.750 |
| AKYW | FORK ARM THICKNESS | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.500 |
| BCLP | HOLE SHAPE | ROUND |
| CRMK | ANGLE | DEGREES NOMINAL 45.000 |
| FEAT | SPECIAL FEATURES | SHANK IS WELDED ON AT A 45 DEGREE ANGLE; INSIDE SHANK DIAMETER 1.565 IN. MIN AND 1.595 IN. MAX AFTER WELD |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 3RD MATERIAL RESPONSE QQ-A-200 TO 8 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL--23377 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-C-22750 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 31620-1 | 07070 |