NSN 5340-01-485-8824 · NIIN 014858824 · FSC 5340
NO DASHES 5340014858824
In Stock
PAD EYE
Hardware, Commercial
Application: LATCHING DEVICE ASSEMBLY
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATK | EYE INSIDE DIAMETER | INCHES NOMINAL 0.500 |
| AAUA | EYE STOCK THICKNESS | INCHES NOMINAL 0.500 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.620 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.250 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.710 |
| AGAV | END ITEM IDENTIFICATION | LATCHING DEVICE ASSEMBLY |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AXGY | MOUNTING METHOD | BOLT |
| CKCB | PAD THICKNESS | INCHES NOMINAL 0.310 |
| CLMQ | MOUNTING FACILITY DIAMETER | INCHES MINIMUM 0.263 AND INCHES MAXIMUM 0.270 |
| CQCF | CONSTRUCTION | CAST |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PADEYE, CRASH RESTRAINT |
| FEAT | SPECIAL FEATURES | THERE ARE 2 IDENTICAL PAD EYES AT RIGHT ANGLES; 4 MOUNTING HOLES, 2 ARE LOCATED IN THE 2 CORNERS ALONG THE BASE SIDE AT 0.200 IN. FROM THE LENGTH AND WIDTH SIDE, THE OTHER 2 ARE LOCATED BETWEEN THE 2 PADEYES 1.000 IN. |
| MATT | MATERIAL | BODY ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 32216-4 | 07070 |