NSN 5340-01-520-9085 · NIIN 015209085 · FSC 5340
NO DASHES 5340015209085
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Application: OPERTING GEAR
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 5.720 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.940 |
| AGAV | END ITEM IDENTIFICATION | OPERTING GEAR |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 0.620 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES NOMINAL 0.250 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES NOMINAL 0.250 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.310 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.400 |
| AHLX | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 2.240 |
| AHLY | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 2.240 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.125 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.125 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 3.850 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 0.620 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.125 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 0.620 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.310 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.690 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 175.0 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 110.0 |
| FEAT | SPECIAL FEATURES | AREA BETWEEN LEGS HAS TWO MOUNTING HOLES SPACED 2.000 INCHES APART BEGINNING AT A POSITION 1.290 INCHES FROM 110 DEGREE ANGLE (OFF OF FIRST LEG); FOR USE ON GENERATOR EXHAUST LOUVER INSTALLATION |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11 |
| SFTT | SURFACE TREATMENT | ANODIZE AND PRIMER EPOXY AND PLASTIC EPOXY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST TREATMENT RESPONSE DA-IL-A-8625TY2CL1 AND MIL SPEC 2ND TREATMENT RESPONSE -IL--23377 AND MIL SPEC 3RD TREATMENT RESPONSE -IL-C-22750 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 122634-4 | 82340 |