NSN 5340-01-577-4831 · NIIN 015774831 · FSC 5340
NO DASHES 5340015774831
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | MILLIMETERS NOMINAL 12.7 |
| AJZU | FIRST LEG STYLE | |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | MILLIMETERS NOMINAL 19.1 |
| AHQP | FIRST LEG CORNER RADIUS | MILLIMETERS NOMINAL 6.4 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | MILLIMETERS NOMINAL 41.5 |
| AHQA | CENTER SECTION WIDTH | MILLIMETERS NOMINAL 79.6 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.187 |
| AHQN | FIRST LEG WIDTH | MILLIMETERS NOMINAL 79.6 |
| FEAT | SPECIAL FEATURES | EXPORT CONTROLLED; TECH DATA NOT AUTHORIZED TO BE RELEASED OUTSIDE OF THE U.S.;HAS ADDITIONAL RECTANGULAR CUT OUT OF 36.8MM X 21.1 MM; HAS ADDITIONAL 3.6MM DIAMETER MOUNTING HOLE CENTERED AT A POSITION 6.8MM FROM BOTTOM EDGE AND 6.2MM FROM SIDE EDGE, CLOSEST TO PREVIOUSLY LISTED MOUNTING HOLES;ALSO HAS ADDITIONAL CUT OUT FEATURE INSIDE OF PREVIOUSLY LISTED MOUNTING HOLES AND EXTENDING RIGHT ON THROUGH BOTTOM EDGE |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, DIANOGSTIC TEST |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | MILLIMETERS NOMINAL 28.6 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | MILLIMETERS NOMINAL 4.1 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | MILLIMETERS NOMINAL 11.1 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.187 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.187 |
| AHPZ | CENTER SECTION HEIGHT | MILLIMETERS NOMINAL 92.2 |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | MILLIMETERS NOMINAL 28.2 |
| ADLL | SECOND LEG LENGTH | MILLIMETERS NOMINAL 61.7 |
| AHLF | SECOND LEG WIDTH | MILLIMETERS NOMINAL 79.6 |
| AHLG | SECOND LEG CORNER RADIUS | MILLIMETERS NOMINAL 5.5 |
| AHLK | FIRST LEG HOLE DIAMETER | MILLIMETERS MINIMUM 7.5 AND MILLIMETERS MAXIMUM 8.5 |
| AHLN | SECOND LEG HOLE DIAMETER | MILLIMETERS NOMINAL 3.6 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | MILLIMETERS NOMINAL 28.6 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1000892 | 1EFH8 |