NSN 5340-01-616-2150 · NIIN 016162150 · FSC 5340
NO DASHES 5340016162150
In Stock
PLATE,MOUNTING
Hardware, Commercial
Application: MRAP BUFFALO MK2A2
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SHPE | SHAPE | IRREGULAR |
| AGAV | END ITEM IDENTIFICATION | MRAP BUFFALO MK2A2 |
| CDDG | RECESS WIDTH | INCHES NOMINAL 1.75 |
| FEAT | SPECIAL FEATURES | MOUNTING CONFIGURATION: THE 4 MOUNTING HOLES 0.27 INCH DIAMETER ARE ON CENTER FROM LEFT TO RIGHT 0.50 INCH AND 2.76 INCH AND FROM BOTTOM TO TOP 1.37 INCH AND 3.63 INCH; THE 2 MOUNTING HOLES 0.33 INCH DIAMETER ARE ON CENTER (1EA) FROM LEFT TO RIGHT 3.40 INCH AND BOTTOM TO TOP 1.00 INCH AND (1EA) ON CENTER FROM LEFT TO RIGHT 5.56 INCH AND BOTTOM TO TOP 4.00 INCH |
| ABNM | THICKNESS | INCHES NOMINAL 0.239 |
| ABRY | LENGTH | INCHES NOMINAL 9.75 |
| ABTB | MOUNTING HOLE DIAMETER | FIFTH HOLE INCHES NOMINAL 0.33 |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | CARC (CHEMICAL AGENT RESISTANT COATING) |
| ABGL | WIDTH | INCHES NOMINAL 5.00 |
| ABTB | MOUNTING HOLE DIAMETER | SIXTH HOLE INCHES NOMINAL 0.33 |
| ABTB | MOUNTING HOLE DIAMETER | THIRD HOLE INCHES NOMINAL 0.27 |
| ABTJ | MOUNTING HOLE QUANTITY | 6 |
| ACHY | MOUNTING HOLE TYPE | UNTHREADED |
| ADWC | RECESS LENGTH | INCHES NOMINAL 3.50 |
| ABTB | MOUNTING HOLE DIAMETER | SECOND HOLE INCHES NOMINAL 0.27 |
| ABTB | MOUNTING HOLE DIAMETER | FOURTH HOLE INCHES NOMINAL 0.27 |
| ABTB | MOUNTING HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.27 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 513092 | 29355 |
| 11018G0107 | 01365 |