NSN 5340-01-624-5625 · NIIN 016245625 · FSC 5340
NO DASHES 5340016245625
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| STYL | STYLE DESIGNATOR | |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.322 AND INCHES MAXIMUM 0.332 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.307 AND INCHES MAXIMUM 0.317 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.255 AND INCHES MAXIMUM 0.265 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| ASXK | HOLE QUANTITY | 2 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, ANGLE, 90 DEGREES, CRES |
| FEAT | SPECIAL FEATURES | BRACKET HAS A ROCKWELL C HARDNESS RATING OF 30-38. |
| MATT | MATERIAL | STEEL COMP 410 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.945 AND INCHES MAXIMUM 0.955 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.005 AND INCHES MAXIMUM 1.015 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AJZU | FIRST LEG STYLE | |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AJFQ | SECOND LEG END RADIUS | INCHES NOMINAL 0.500 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205 |
| AJFP | FIRST LEG END RADIUS | INCHES NOMINAL 0.500 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.307 AND INCHES MAXIMUM 0.317 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS9602-130 | 81343 |
| SAE-AS9602 | 0U583 |
| MS9602-130 | 0U583 |