NSN 5340-01-671-6425 · NIIN 016716425 · FSC 5340
NO DASHES 5340016716425
In Stock
CLAMP,LOOP
Hardware, Commercial
Application: F-35 AIRCRAFT
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.077 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.421 AND INCHES MAXIMUM 0.451 |
| MATT | MATERIAL | CUSHION SILICON |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | BAND STEEL CORROSION RESISTING |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.020 |
| AGAV | END ITEM IDENTIFICATION | F-35 AIRCRAFT |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, LOOP TYPE, CUSHIONED, SUPPORT |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.654 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-DTL-8603 | 81349 |
| MIL-C-8603 | 81349 |
| MS21919CH1 | 83930 |
| MS21919CH1 | 84971 |
| MS21919CH1 | 96906 |
| MS21919CH1 | 18076 |