NSN 5340-01-693-3888 · NIIN 016933888 · FSC 5340
NO DASHES 5340016933888
In Stock
CLAMP,LOOP
Hardware, Commercial
Application: CLAMP, STRAP
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.750 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.018 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE UNS S31600 OR UNS S31603 OR UNS S31653 OR UNS S31700 OR |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AGAV | END ITEM IDENTIFICATION | CLAMP, STRAP |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | AN/BVY-1(V)4 |
| MATT | MATERIAL | BAND STEEL CORROSION RESISTING |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 3.869 |
| STYL | STYLE DESIGNATOR | |
| AXWJ | FASTENING DEVICE TYPE | CLIP |
| FEAT | SPECIAL FEATURES | ONE SIDE OF THE LOCKING END OF THE CLAMP CONTAINS 2 0.162 HOLES THRU ONE SIDE THE OTHER SIDE CONTAINS 2 0.138-32 UNC-2B HOLES |
| ABGC | SLOT WIDTH | INCHES NOMINAL 0.15 |
| ABGD | SLOT LENGTH | INCHES NOMINAL 0.16 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 7.495 AND INCHES MAXIMUM 7.555 |
| AKZC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES | INCHES NOMINAL 0.340 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 101668 | 34228 |