NSN 5340-01-693-6327 · NIIN 016936327 · FSC 5340
NO DASHES 5340016936327
In Stock
CLAMP,LOOP
Hardware, Commercial
Application: 2355-01-669-0331
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | OBLONG AND UNTHREADED ROUND |
| ABGC | SLOT WIDTH | INCHES MINIMUM 0.391 AND INCHES MAXIMUM 0.421 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 1.182 AND INCHES MAXIMUM 1.212 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.015 AND INCHES MAXIMUM 0.045 |
| AGAV | END ITEM IDENTIFICATION | 2355-01-669-0331 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.869 AND INCHES MAXIMUM 0.899 |
| ABGD | SLOT LENGTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5513 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE SAE 1200 -S BA 710 C12 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.735 AND INCHES MAXIMUM 0.765 |
| MATT | MATERIAL | BAND STEEL COMP 304 OR STEEL COMP 321 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.391 AND INCHES MAXIMUM 0.421 |
| MATT | MATERIAL | CUSHION RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.640 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S464 | 18076 |
| S464-SS-G-12 | 18076 |