NSN 5340-01-707-8623 · NIIN 017078623 · FSC 5340
NO DASHES 5340017078623
In Stock
CLAMP,BLOCK,SECTION
Hardware, Commercial
Application: 2350-01-619-5649
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWM | CLAMPING HOLE DIAMETER | FIFTH HOLE INCHES NOMINAL 0.680 |
| CWWM | CLAMPING HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.530 |
| CWWM | CLAMPING HOLE DIAMETER | FOURTH HOLE INCHES NOMINAL 0.680 |
| CWTD | CLAMPING HOLE QUANTITY | 6 |
| BYGG | BLOCK HEIGHT | INCHES NOMINAL 0.750 |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE(S) |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 13.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 2.875 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.396 AND INCHES MAXIMUM 0.416 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | INCHES NOMINAL 0.500 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-619-5649 |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | INCHES NOMINAL 8.000 |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | INCHES NOMINAL 12.500 |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | INCHES NOMINAL 2.320 |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | INCHES NOMINAL 3.630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST- A240 TO A240- |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | INCHES NOMINAL 0.500 |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | INCHES NOMINAL 1.090 |
| CWYM | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES | INCHES NOMINAL 5.090 |
| CWYS | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES | INCHES NOMINAL 6.550 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PASS-THROUGH |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | INCHES NOMINAL 1.160 |
| CWWM | CLAMPING HOLE DIAMETER | THIRD HOLE INCHES NOMINAL 0.530 |
| MATT | MATERIAL | STEEL COMP 304 AND STEEL COMP 316 |
| CWWM | CLAMPING HOLE DIAMETER | SECOND HOLE INCHES NOMINAL 0.530 |
| CWWM | CLAMPING HOLE DIAMETER | SIXTH HOLE INCHES NOMINAL 0.680 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12592432 | 19207 |