NSN 5340-01-714-7475 · NIIN 017147475 · FSC 5340
NO DASHES 5340017147475
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S-5510 ANNEALED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S 3347 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND OZONE RESISTANT AND TEAR RESISTANT |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.926 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 2.297 AND INCHES MAXIMUM 2.327 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP,LOOP-CUSHIONED,SLOTTED,SELF-RETAINING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S 2700 |
| STYL | STYLE DESIGNATOR | |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.616 AND INCHES MAXIMUM 1.646 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.036 AND INCHES MAXIMUM 0.044 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9NG0012H37R | 76823 |
| 9NG0012 | 76823 |
| 40005SS37HS | 83930 |
| TA0220055HO37HW | 84971 |