NSN 5340-01-718-6487 · NIIN 017186487 · FSC 5340
NO DASHES 5340017186487
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Application: F-15EX
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHPZ | CENTER SECTION HEIGHT | INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.910 |
| AHQA | CENTER SECTION WIDTH | INCHES MINIMUM 1.430 AND INCHES MAXIMUM 1.490 |
| AHQB | CENTER SECTION THICKNESS | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.090 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 1.430 AND INCHES MAXIMUM 1.490 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.410 |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.850 AND INCHES MAXIMUM 0.870 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.715 AND INCHES MAXIMUM 0.735 |
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 1.430 AND INCHES MAXIMUM 1.490 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.172 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.810 AND INCHES MAXIMUM 0.830 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.395 AND INCHES MAXIMUM 0.415 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.090 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.090 |
| CSSQ | FIRST LEG ANGLE | RADIANS NOMINAL 0.12 |
| CSSR | SECOND LEG ANGLE | RADIANS NOMINAL 0.12 |
| SFTT | SURFACE TREATMENT | PRIMER |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S4050 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CBBL | FEATURES PROVIDED | NUT |
| FEAT | SPECIAL FEATURES | FIRST LEG HAS TWO 0.098 INCH (MIN) AND 0.103 INCH (MAX) HOLES, AND ONE 0.203 INCH (MIN) AND 0.210 INCH (MAX) HOLE |
| MATT | MATERIAL | ALUMINUM ALLOY 7050 |
| AKBU | SECOND LEG STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AJZU | FIRST LEG STYLE |