NSN 5340-01-724-4778 · NIIN 017244778 · FSC 5340
NO DASHES 5340017244778
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Application: F-15EX
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL STD SINGLE MATERIAL RESPONSE A-S4050 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.063 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.725 |
| STYL | STYLE DESIGNATOR | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET ASSEMBLY - CLAMP SUPPORT |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | RADIANS NOMINAL 0.12 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.843 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.25 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.172 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.082 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.063 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.063 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-RF-85582 |
| CSSR | SECOND LEG ANGLE | RADIANS NOMINAL 0.12 |
| SFTT | SURFACE TREATMENT | PRIMER EPOXY |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.46 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.25 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| MATT | MATERIAL | ALUMINUM ALLOY 7050 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 1.250 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 1.46 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.46 |