NSN 5340-01-118-6685 · NIIN 011186685 · FSC 5340
NO DASHES 5340011186685
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.274 AND INCHES MAXIMUM 0.288 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.765 AND INCHES MAXIMUM 0.815 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.790 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.640 |
| MATT | MATERIAL | CUSHION PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MFR REF SINGLE MATERIAL RESPONSE A50TF118,CL A,CAGEC 07482 |
| STYL | STYLE DESIGNATOR |