NSN 5340-01-370-9840 · NIIN 013709840 · FSC 5340
NO DASHES 5340013709840
In Stock
CLAMP,LOOP
Hardware, Commercial
Application: F100PW0229 ENGINE
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.040 |
| AGAV | END ITEM IDENTIFICATION | F100PW0229 ENGINE |
| AKZC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES | INCHES NOMINAL 1.250 |
| AXWJ | FASTENING DEVICE TYPE | SPRING TENSION |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.852 AND INCHES MAXIMUM 0.882 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.247 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.688 |
| BZTQ | LUG HOLE DIAMETER | INCHES NOMINAL 0.204 |
| FEAT | SPECIAL FEATURES | TORQUE SET HEAD SCREW;ONE LUG HOLE SLOTTED;INCLUDES WASHER |
| MATT | MATERIAL | PIN/STUD STEEL |
| MATT | MATERIAL | CUSHION RUBBER FLUOROSILICONE CLASS FQ OR RUBBER SILICONE CLASS Q |
| MATT | MATERIAL | SCREW STEEL |
| MATT | MATERIAL | BAND STEEL CORROSION RESISTING |
| MATT | MATERIAL | NUT STEEL COMP 316 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | PIN/STUD ASSN STD SINGLE MATERIAL RESPONSE A-S 5513 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MFR REF SINGLE MATERIAL RESPONSE WA 36081,CAGEC 77445 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-C-85052 TO 3 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SCREW ASSN STD SINGLE MATERIAL RESPONSE A-S 5525 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT ASSN STD SINGLE MATERIAL RESPONSE AST- B-525 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 013239782. An older drawing citing one of those numbers resolves here.