NSN 5342-00-315-8906 · NIIN 003158906 · FSC 5342
NO DASHES 5342003158906
In Stock
BRACKET,ANGLE
Hardware, Weapon System
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | JAW,CLAMPING SEALING STRIP ANCHOR |
| MATT | MATERIAL | STEEL COMP 6150 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.875 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.375 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 3.187 |
| CRMK | ANGLE | DEGREES NOMINAL 90.0 |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE I/A/W SPEC ASTM A322,GRADE STEEL 6150 ANNEALED OR SAE AMS 4350M; HEAT TREAT I/A/W AMS 2759/1 SO THAT FINISHED PART HAS A HARDNESS OF HRC 41 TO 45;EACH FINISHED PART SHALL BE 100% MAGNETIC PARTICLE INSPECTED I/A/W ASTM E1444/E1444M PERFORMED BY BOTH CIRCULAR AND LONGITUDINAL METHOD;THE WET PROCESS SHALL BE USED; PARTS MUST MEET REQUIREMENTS OF MIL-STD-2035 EXCEPT NO INDICATIONS GREATER THAN .062" ARE ACCEPTABLE |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 05047-AS-E Y14.5--1982 AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 05047-AS-E B46.1 AND GOVERNMENT STANDARD 96906--IL-STD-130 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.125 |
| HEAT | HEAT TREATMENT | ANNEALED |
| FEAT | SPECIAL FEATURES | THE ITEM SPECIFIED BY DRAWING 11-30635 WILL BE USED AS A PART OF A SYSTEM SUPPORTING THE LAUNCH AND OR RECOVERY OF AIRCRAFT AND IS ESSENTIAL TO SYSTEM PERFORMANCE OR OPERATION OR THE PRESERVATION OF LIFE OR SAFETY OF OPERATING PERSONNEL; ITEM HAS BEEN DESIGNATED AS CRITICAL APPLICATION ITEM (CAI); ANY DEVIATION FROM DRAWING WITHOUT WRITTEN APPROVAL FROM THE NAVAL AIR SYSTEMS COMMAND (NAVIAR), SUPPORT EQUIPMENT AND AIRCRAFT LANCH AND RECOVERY EQUIPMENT (SE AND ALRE) DEPARTMENT, IS STRICTLY PROHIBITED |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11-30635-1 | 1EV05 |
| 11-30635-1 | 20722 |
| 11-30635-1 | 1UF60 |
| 11-30635-1 | 3W132 |
| 11-30635-1 | 47347 |
| 11-30635-1 | 74627 |
| 11-30635-1 | 80020 |
| 11-30635 | 80020 |
| 11-30635-1 | 0BVP9 |