NSN 5342-01-548-1192 · NIIN 015481192 · FSC 5342
NO DASHES 5342015481192
In Stock
BELLOWS,PROTECTION
Hardware, Weapon System
Application: GEARBOX ASSEMBLY, LET OP
Technical characteristics
6 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | TECH DATA NOT AUTHORIZED TO BE RELEASED OUTSIDE OF US |
| ABNM | THICKNESS | INCHES NOMINAL 0.033 |
| SUPP | SUPPLEMENTARY FEATURES | INSIDE DIAMETER 5.0 INCHES; OUTSIDE DIAMETER 7.0 INCHES. EXTENDED LENGHTH 10.00 IN, RETRACTED LENGTH 1.63 IN. MATERIAL: HYPALON/NYLON FOLLOWING THE INITIAL CURING THAT THE VENDOR PERFORMS, THE BELLOWS SHALL BE CURED FOR AN ADDITIONAL 48 HOURS AT 125 DEGREES FARENHEIT. THIS MUST BE PERFORMED IN ADDITION TO THE NORMAL CURING PERFORMED BY THE VENDOR IN THE MANUFACTURE OF THE BELLOWS. END CONNECTION - 4.75 ID X 0.75 LONG. |
| MATT | MATERIAL | RUBBER SYNTHETIC |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AGAV | END ITEM IDENTIFICATION | GEARBOX ASSEMBLY, LET OP |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ERH541-0252A83 | 53711 |
| 167-6985280-127 | 53711 |
| 167-6985280 | 53711 |
| GF152618 | 88759 |
| H541-0252 | 96169 |
| H5410252-127 | 96169 |