NSN 5905-00-995-0214 · NIIN 009950214 · FSC 5905
NO DASHES 5905009950214
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 300.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.220 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.640 |
| AEDX | SHAFT STYLE | |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 48.00 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 0.505 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.190 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.505 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.550 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.1 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 25.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 300.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |