NSN 5355-00-188-1203 · NIIN 001881203 · FSC 5355
NO DASHES 5355001881203
In Stock
DIAL,CONTROL
Knobs and Pointers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABSX | ATTACHMENT METHOD | SETSCREWS |
| ABTV | KNOB PORTION DIAMETER | INCHES MINIMUM 1.365 AND INCHES MAXIMUM 1.385 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.740 AND INCHES MAXIMUM 1.760 |
| ABFR | SETSCREW HOLE QUANTITY | 2 |
| ABFU | DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.401 |
| CRRL | POSITIONING MECHANISM TYPE | KNOB |
| FEAT | SPECIAL FEATURES | TOP OF KNOB REFERENCED MARKED W/10; INSERT MATERIAL: COPPER ALLOY; KNOB MATERIAL: PLASTIC |
| HGTH | HEIGHT | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | SCREW HOLE UNIFIED NATIONAL COARSE (UNC) |
| CBSC | SCREW DRIVE TYPE | SLOT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | SCREW HOLE INCHES 0.164 |
| AKCV | DRIVE TYPE | DIRECT |
| ATEQ | SCALE TYPE | SINGLE SCALE LINEAR |
| ABWG | SCALE DIVISION QUANTITY | 10 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| Z5K | 30646 |
| L7879PTZ5KDET2 | 30646 |
| AM25617 | 58258 |
| 4107L | 72512 |
| 305-28 | 99872 |
Supersedes
This item replaces cancelled NIIN 003289558. An older drawing citing one of those numbers resolves here.