NSN 5360-01-250-5649 · NIIN 012505649 · FSC 5360
NO DASHES 5360012505649
In Stock
SPRING,HELICAL,TORSION
Coil, Flat, Leaf, and Wire Springs
Application: F15-E
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARX | INSIDE DIAMETER | INCHES NOMINAL 5.180 |
| ABQK | END STYLE | |
| AGAV | END ITEM IDENTIFICATION | F15-E |
| AGEK | SPRING FREE LENGTH | INCHES NOMINAL 1.115 |
| APCN | COIL QUANTITY | 3-3/4 |
| AXLH | COIL HELIX DIRECTION | LEFT-HAND |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | INCHES NOMINAL 6.000 |
| CRTL | CRITICALITY CODE JUSTIFICATION | SUPP |
| FEAT | SPECIAL FEATURES | ENDS THINNER AND WIDER FOR APPROX. 2.140 IN.; EACH END HAS TWO PUNCHED HOLES,0.318 IN. DIA,CENTERED 1.250 IN. APART WITH ONE SMALLER,THREADED HOLE BETWEEN THEM,CSK 90.0 DEG BY 0.275 IN. DIA |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| SUPP | SUPPLEMENTARY FEATURES | SHOT BLASTED; ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT, SURFACE FINISH, OR MATERIAL TYPE AND SPECIAL INSP. REQ.S SUCH AS MAGNETIC PARTICLE INSP. OR FLUORESCENT PENETRANT INSPECTION |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 68A412754-2001 | 1L8A4 |
| 68A412754-2001 | 4JZH8 |
| 68A412754-2001 | 55284 |
| 68A412754-2001 | 5ZBP4 |
| 68A412754-2001 | 6K4C8 |
| 68A412754-2001 | 76301 |
| 68A412754-2001 | 13002 |
| 68A412754-2001 | 18501 |
| 68A412754-2001 | 17576 |