NSN 5365-00-396-4554 · NIIN 003964554 · FSC 5365
NO DASHES 5365003964554
In Stock
RING,EXTERNALLY THREADED
Bushings, Rings, Shims, and Spacers
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AWQB | PROCESS END LOCATION | END OPPOSITE DRIVE END |
| AGZD | BORE SHAPE | STRAIGHT |
| AJYP | SCREW THREAD SERIES DESIGNATOR | NONSTANDARD |
| AKCV | DRIVE TYPE | SLOTTED FACE |
| AWQA | BORE EDGE PROCESS | CHAMFERED |
| AWHW | ACCOMMODATION TYPE AND QUANTITY | SLOTS 6 |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE A-S 4120 OR FED SPEC SINGLE MATERIAL RESPONSE A-S 4088 |
| AEJZ | DEPTH | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.160 |
| AASG | CASEHARDENING INDICATOR | NOT CASE-HARDENED |
| AATE | CHAMFER ANGLE IN DEG | 43.0 AND 47.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABGL | WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.190 AND INCHES MAXIMUM 1.210 |
| ABUJ | THREAD SIZE | 2.0625-16 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.670 AND INCHES MAXIMUM 1.690 |
| AAJE | THREAD PITCH DIAMETERS | INCHES 2.0076 TO 2.0119 |
| AWPF | ANGLE BETWEEN ACCOMMODATIONS IN DEG | 30.0 |
| FEAT | SPECIAL FEATURES | DRIVE END OUNTERBORED 0.760 IN. MIN 0.800 IN. MAX DEEP 1.770 IN. MIN 1.790 IN. MAX DIA |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 179847 | 77445 |