NSN 5365-00-435-8915 · NIIN 004358915 · FSC 5365
NO DASHES 5365004358915
In Stock
RING,EXTERNALLY THREADED
Bushings, Rings, Shims, and Spacers
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABUJ | THREAD SIZE | 1.500-18 |
| AGZD | BORE SHAPE | STRAIGHT |
| AAJD | THREAD CLASS | 3A |
| AWPF | ANGLE BETWEEN ACCOMMODATIONS IN DEG | 90.0 |
| AWPG | RADIUS FROM GEOMETRIC AXIS TO ACCOMMODATION | INCHES NOMINAL 0.562 |
| AASG | CASEHARDENING INDICATOR | NOT CASE-HARDENED |
| AATE | CHAMFER ANGLE IN DEG | 40.0 AND 50.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | ANODIZE |
| ABMZ | DIAMETER | INCHES MINIMUM 0.187 AND INCHES MAXIMUM 0.192 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.875 |
| AEJZ | DEPTH | INCHES NOMINAL 0.210 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3, TE-ER T3511 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AKCV | DRIVE TYPE | DRILLED FACE |
| AWHW | ACCOMMODATION TYPE AND QUANTITY | HOLES 4 |
| AWQA | BORE EDGE PROCESS | CHAMFERED |
| AWQB | PROCESS END LOCATION | END OPPOSITE DRIVE END |
| FEAT | SPECIAL FEATURES | FOUR HOLES DRILLED ON A 40 DEG MIN,50 DEG MAX ANGLE INTO THE DRIVING HOLES 0.062 IN. DIA |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.308 |
| AAZP | CHAMFER LENGTH | INCHES NOMINAL 0.090 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 29226 | 99643 |