NSN 5365-00-536-9990 · NIIN 005369990 · FSC 5365
NO DASHES 5365005369990
In Stock
SHIM
Bushings, Rings, Shims, and Spacers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES NOMINAL 1.250 |
| ADPW | OUTSIDE CORNER RADIUS | INCHES NOMINAL 0.25 |
| ADUM | OVERALL THICKNESS | INCHES NOMINAL 0.010 |
| ABVL | APERTURE DIAMETER | INCHES NOMINAL 1.328 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.75 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.75 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.201 |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE SAE A-S-QQ--35 TYE VI |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | STEEL CORROSION RESISTING OR STEEL COMP 301 OR STEEL COMP 302 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST- A480 OR ASSN STD SINGLE MATERIAL RESPONSE AST- A666 301 TO 302 1 TO 2 HARD THRU FULL HARD |
| FEAT | SPECIAL FEATURES | ALONG THE TOP EDGE THERE IS A 0.78 WIDE AND 0.125 DEEP CUT OUT CENTERALLY LOCATED ALONG THE TOP EDGE |
| AECS | BOLT HOLE QUANTITY | 4 |
| CQCF | CONSTRUCTION | ONE-PIECE |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES NOMINAL 1.250 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 14984-1 | 98889 |
| 200413191-01 | 98752 |