NSN 5365-00-846-7660 · NIIN 008467660 · FSC 5365
NO DASHES 5365008467660
In Stock
BUSHING,NONMETALLIC
Bushings, Rings, Shims, and Spacers
Application: MRAP - COMMON NSN - USED ON 2 MRAP VARIANTS AND 3 OTHER WEAPON SYSTEMS.; MRAP - MAXXPRO DASH ISS W/OGPK AND W/CROW
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED RUBBER SYNTHETIC |
| ABHP | OVERALL LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 0.250 |
| FEAT | SPECIAL FEATURES | SLEEVE MUST BE MARKED WITH MANUFACTURER'S IDENTIFICATION, NAME OR TRADE MARK. MATERIAL: CLASS B PER NAVISTAR SPEC D-15 PART 00, PLUS A LOW TEMPERATURE COMPRESSION REQUIREMENT AGE 22 HOURS AT =40 DEGREE FARIENHEIT, ASTM D-1229 MODIFIED, COMPRESS RING AXIALLY 25%M NO CRACKS PERMITTED ACTUAL PIECE TO BE QUALIFIED. |
| AGAV | END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON 2 MRAP VARIANTS AND 3 OTHER WEAPON SYSTEMS.; MRAP - MAXXPRO DASH ISS W/OGPK AND W/CROW |
| ABPM | BODY DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 0.563 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SLEEVE, 3/8 TUBE -FLEX |
| APGF | DESIGN TYPE | SINGLE CENTRALLY LOCATED HOLE |
| ADYT | CENTER HOLE DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 0.344 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 015565468 · 015564867. An older drawing citing one of those numbers resolves here.