NSN 5365-00-858-8554 · NIIN 008588554 · FSC 5365
NO DASHES 5365008588554
In Stock
SPACER,RING
Bushings, Rings, Shims, and Spacers
Technical characteristics
9 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CSYM | SURFACE FINISH | LARGEST OUTSIDE DIAMETER MICROINCHES 16.0 |
| MATT | MATERIAL | STEEL COMP 416SE |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 5.0000 AND INCHES MAXIMUM 5.0007 |
| ABHE | OUTSIDE DIAMETER | INCHES MINIMUM 5.748 AND INCHES MAXIMUM 5.752 |
| FEAT | SPECIAL FEATURES | LEFT ID COUNTERBORED TO 5.140 IN.DIA BY 0.147 IN. DEEP W/ONE GROOVE 0.084 IN. W BY 5.245 IN. DIA LOCATED 0.063 IN. FROM LEFT END AND ONE CENTRAL INTERNAL GROOVE 0.190 IN. W BY 5.237 IN.DIA,TWO HOLES 0.062 IN. DIA DRILLED 0.300 IN. DEEP 180 DEG APART ON OD 0.167 FROM LEFT END AT 13 DEG ANGLE |
| ADUM | OVERALL THICKNESS | INCHES NOMINAL 0.700 |
| CSYM | SURFACE FINISH | LEFT SIDE MICROINCHES 16.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5610 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 546737 | 73030 |