NSN 5365-01-105-3002 · NIIN 011053002 · FSC 5365
NO DASHES 5365011053002
In Stock
SPACER,PLATE
Bushings, Rings, Shims, and Spacers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.161 |
| AAZT | SLOT DEPTH | INCHES NOMINAL 0.152 |
| ABGC | SLOT WIDTH | INCHES NOMINAL 0.700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.560 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 2.560 |
| ADUE | APERTURE WIDTH | INCHES NOMINAL 1.562 |
| ADUF | APERTURE LENGTH | INCHES NOMINAL 1.562 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES NOMINAL 2.062 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES NOMINAL 1.750 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES NOMINAL 0.406 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 0.250 |
| AECS | BOLT HOLE QUANTITY | 4 |
| FEAT | SPECIAL FEATURES | SLOT LOCATED AT LOWER RIGHT CORNER |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11,T6 |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541,CL 3 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 900674 | 33827 |