NSN 5365-01-116-4995 · NIIN 011164995 · FSC 5365
NO DASHES 5365011164995
In Stock
SPACER,PLATE
Bushings, Rings, Shims, and Spacers
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.158 AND INCHES MAXIMUM 0.164 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.250 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.250 |
| ABVL | APERTURE DIAMETER | INCHES NOMINAL 0.750 |
| ADUP | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | INCHES NOMINAL 0.060 |
| ADUQ | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | INCHES NOMINAL 0.060 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES NOMINAL 0.972 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES NOMINAL 0.972 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES NOMINAL 0.139 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 0.139 |
| AECS | BOLT HOLE QUANTITY | 4 |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11,T6 |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541,CL 3 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 901425 | 33827 |