NSN 5365-01-138-5889 · NIIN 011385889 · FSC 5365
NO DASHES 5365011385889
In Stock
RING,EXTERNALLY THREADED
Bushings, Rings, Shims, and Spacers
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASG | CASEHARDENING INDICATOR | NOT CASE-HARDENED |
| AATE | CHAMFER ANGLE IN DEG | 45.0 |
| AAZP | CHAMFER LENGTH | INCHES NOMINAL 0.030 |
| ABGL | WIDTH | INCHES NOMINAL 0.250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.940 |
| ABUJ | THREAD SIZE | 1.750-16 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.808 AND INCHES MAXIMUM 0.809 |
| AEJZ | DEPTH | INCHES NOMINAL 0.120 |
| AGZD | BORE SHAPE | STRAIGHT |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UN |
| AKCV | DRIVE TYPE | SLOTTED FACE |
| AWHW | ACCOMMODATION TYPE AND QUANTITY | SLOTS 2 |
| AWPF | ANGLE BETWEEN ACCOMMODATIONS IN DEG | 180.0 |
| AWQA | BORE EDGE PROCESS | CHAMFERED |
| AWQB | PROCESS END LOCATION | BOTH ENDS |
| MATT | MATERIAL | COPPER ALLOY 903 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-C-390,ALLOY 903 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 711-4678214 ITEM 7 | 53711 |
| 711-4678214 ITEM 7 | 80064 |
| 711-4678214 ITEM 6 | 80064 |
| 87692-1812 ITEM 6 | 96169 |
| 8769-1812 ITEM 7 | 96169 |
Supersedes
This item replaces cancelled NIIN 011394966. An older drawing citing one of those numbers resolves here.