NSN 5365-01-231-5938 · NIIN 012315938 · FSC 5365
NO DASHES 5365012315938
In Stock
SPACER,PLATE
Bushings, Rings, Shims, and Spacers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.149 AND INCHES MAXIMUM 0.154 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.360 AND INCHES MAXIMUM 1.390 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.360 AND INCHES MAXIMUM 1.390 |
| ABVL | APERTURE DIAMETER | INCHES MINIMUM 1.200 AND INCHES MAXIMUM 1.220 |
| ADPW | OUTSIDE CORNER RADIUS | INCHES MINIMUM 1.840 AND INCHES MAXIMUM 1.850 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES MINIMUM 1.057 AND INCHES MAXIMUM 1.067 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES MINIMUM 1.057 AND INCHES MAXIMUM 1.067 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.170 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.170 |
| AECS | BOLT HOLE QUANTITY | 4 |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3 T4 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6 T4 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 34713 | 70210 |
| 012315938-04224 | 13873 |