NSN 5365-01-434-0855 · NIIN 014340855 · FSC 5365
NO DASHES 5365014340855
In Stock
SPACER,SPECIAL SHAPED
Bushings, Rings, Shims, and Spacers
Application: MRAP - RG-33; MEDIUM MINE PROTECTED VEHICLE - MMPV
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHC | OVERALL WIDTH | INCHES MINIMUM 0.82 AND INCHES MAXIMUM 0.94 |
| ADUM | OVERALL THICKNESS | INCHES MINIMUM 0.44 AND INCHES MAXIMUM 0.56 |
| AECS | BOLT HOLE QUANTITY | 3 |
| AGAV | END ITEM IDENTIFICATION | MRAP - RG-33; MEDIUM MINE PROTECTED VEHICLE - MMPV |
| AHNX | BOLT HOLE DIAMETER | INCHES MINIMUM 0.433 AND INCHES MAXIMUM 0.453 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER, BACKREST |
| FEAT | SPECIAL FEATURES | ITEM HAS A FILLET RADIUS OF 0.015-0.030 INCHES. ITEM IS BLACK. HOLE CENTER LINE IS 0.41 INCHES FROM INSIDE ANGLE. CENTER HOLE IS 15 DEGREES FROM RIGHT END. CENTER TO CENTER MEASUREMENTS FOR BOLT HOLES ARE LEFT HOLE TO CENTER: 5.781 INCHES AND CENTER TO RIGHT: 3.179 INCHES. OVERALL OUTSIDE ANGLE IS 39 DEGREES. MATERIAL IS ALUMINUM 6061-T6511. |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-A8625A TYE 2, CLASS 2 (BLACK) |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 4660151 | 54786 |
| 4660151-000 | 6W728 |
| 4660151 | 6W728 |
| 4660151 | 076M6 |
Supersedes
This item replaces cancelled NIIN 015860766. An older drawing citing one of those numbers resolves here.