NSN 5365-01-436-9357 · NIIN 014369357 · FSC 5365
NO DASHES 5365014369357
In Stock
SPACER,PLATE
Bushings, Rings, Shims, and Spacers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.286 AND INCHES MAXIMUM 0.296 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.250 |
| ADUM | OVERALL THICKNESS | INCHES NOMINAL 0.020 |
| ADUP | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | INCHES NOMINAL 0.200 |
| ADUQ | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | INCHES NOMINAL 0.200 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES NOMINAL 1.250 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES NOMINAL 1.800 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES NOMINAL 0.350 |
| AECS | BOLT HOLE QUANTITY | 4 |
| FEAT | SPECIAL FEATURES | ALL BOLT HOLES ARE NOT ON SAME CENTERLINE ALONG WIDTH |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11,T6 OR T651 |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625,TY2,CL1 |
| STYL | STYLE DESIGNATOR |