NSN 5365-01-526-0022 · NIIN 015260022 · FSC 5365
NO DASHES 5365015260022
In Stock
SPACER,RING
Bushings, Rings, Shims, and Spacers
Application: TF33 PW102 ENGINE
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHE | OUTSIDE DIAMETER | INCHES MINIMUM 14.840 AND INCHES MAXIMUM 14.850 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 13.045 AND INCHES MAXIMUM 13.047 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER - RING, COMPRESSOR TIE ROD NUT |
| FEAT | SPECIAL FEATURES | BOLT CIRCLE DIAMETER IS AT 14.000. THERE ARE 16 HOLES AT .504 TO .507 DIAMETER EVERY 22.5 DEGREES. THERE ARE 12 HOLES ON THE BASIS OF 16 HOLES EQUALLY SPACED, WITH 4 HOLES OMITTED, THEY ARE .370 TO .380 DIAMETER STARTING AT 11.25 DEGREES FROM THE 0 DEGREES, THEN EVERY 22.5 DEGREES, WITH OMITTING HOLES 2,6,10, AND 14 OF THIS DIAMETER ONLY. THE OUTSIDE EDGE OF THE THICKNESS, AT .055 TO .070 IS CHAMFERRED AT 45 DEGREES WITH + - 2 DEGREES. |
| MATT | MATERIAL | STEEL COMP 615 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 AND MFR REF SINGLE MATERIAL RESPONSE WA-S-5616 AND ASSN STD SINGLE MATERIAL RESPONSE A-S 5508 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| AGAV | END ITEM IDENTIFICATION | TF33 PW102 ENGINE |
| ADUM | OVERALL THICKNESS | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.110 |