NSN 5365-01-529-5225 · NIIN 015295225 · FSC 5365
NO DASHES 5365015295225
In Stock
BUSHING,MACHINE THREAD
Bushings, Rings, Shims, and Spacers
Application: AN/AQS-20A, SHEAR PIN ASSEMBLY
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| BXBR | HOLE INSIDE DIAMETER | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.345 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | THREADED BUSHING |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.750 |
| AGAV | END ITEM IDENTIFICATION | AN/AQS-20A, SHEAR PIN ASSEMBLY |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.557 AND INCHES MAXIMUM 0.588 |
| ABMZ | DIAMETER | INCHES MINIMUM 1.045 AND INCHES MAXIMUM 1.055 |
| FEAT | SPECIAL FEATURES | THREE CIRCLES HAVE BEEN NOTCHED OUT OF THE OUTSIDE DIAMETER EACH 120 DEGREES FROM HTE NEXT, THE DIAMTER OF THE NOTCH IS 0.1055"MIN/0.1105"MAX THERE IS ALSO A FILLET BETWEEN THE FLANGED AND THE BODY OF HTE BUSHING AT A RADIUS OF 0.25"; BUDSHING IS FLANGED, THE FLANGE IS 0.88"MIN/0.090"MAX IN THICKNESS, MATERIAL IS UNS S17400, COND H900, ASTM A564 |