NSN 5365-01-543-1422 · NIIN 015431422 · FSC 5365
NO DASHES 5365015431422
In Stock
BUSHING,MACHINE THREAD
Bushings, Rings, Shims, and Spacers
Application: C-17A AIRCRAFT
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE SAE-A-S-QQ-A-225 TO 8 |
| FEAT | SPECIAL FEATURES | THREADS ARE UNJEF SERIES; HAS A 0.150 WIDE GROVE LOCATED ABOVE THE THREADS, DIA OF GROVE AREA 0.971 TO 0.981; CONTAINS 2 LOCKWIRE HOLES 0.046 DIA LOCATED 180 DEG APART IN THE WRENCHING FACLITY END, 0.065 FROM THE TOP EDGE AND 0.078 FROM THE OUTSIDE EDGE; THREADED END OUTSIDE EDGE CHAMFERED 45 DEG X 0.045 |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| CTTC | THREAD TOLERANCE CLASS | EXTERNAL 3A |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | RETAINER NUT |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.063 |
| BXBR | HOLE INSIDE DIAMETER | INCHES MINIMUM 0.765 AND INCHES MAXIMUM 0.785 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AJYR | SCREW THREAD LENGTH | INCHES NOMINAL 0.370 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.970 AND INCHES MAXIMUM 1.030 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.640 AND INCHES MAXIMUM 0.660 |
| ABNM | THICKNESS | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.140 |
| ADBD | COUNTERSINK DEPTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.025 AND INCHES MAXIMUM 0.040 |
| AGAV | END ITEM IDENTIFICATION | C-17A AIRCRAFT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATA | COUNTERSINK ANGLE IN DEG | 45.0 |
| BQDD | COUNTERSINK LOCATION | THREADED END AND WRENCHING END |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 54542 | 99643 |