NSN 5365-01-717-7933 · NIIN 017177933 · FSC 5365
NO DASHES 5365017177933
In Stock
SPACER,PLATE
Bushings, Rings, Shims, and Spacers
Application: 30MM GUN
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | TOP EDGE CORNER RADIUS FOR BOTH CORNERS IS 0.120 INCHES (MIN) AND 0.140 INCHES (MAX);BOTTOM EDGE CORNER RADIUS FOR BOTH CORNERS IS 0.240 INCHES (MIN) AND 0.260 INCHES (MAX) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | RECTANGULAR WASHER |
| ATPP | SLOT QUANTITY | 2 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES MINIMUM 0.175 AND INCHES MAXIMUM 0.185 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES MINIMUM 1.295 AND INCHES MAXIMUM 1.305 |
| AGAV | END ITEM IDENTIFICATION | 30MM GUN |
| ABGC | SLOT WIDTH | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| ABGD | SLOT LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.120 AND INCHES MAXIMUM 2.140 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.290 AND INCHES MAXIMUM 1.310 |
| ACHY | MOUNTING HOLE TYPE | SLOTTED |
| ADUM | OVERALL THICKNESS | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE AST- A240 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | STEEL COMP 316 OR STEEL COMP 316L |