NSN 5365-01-732-5572 · NIIN 017325572 · FSC 5365
NO DASHES 5365017325572
In Stock
BUSHING,SLEEVE
Bushings, Rings, Shims, and Spacers
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | DP PLUG |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.720 AND INCHES MAXIMUM 0.730 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.25 |
| FEAT | SPECIAL FEATURES | HEAT TREATED PER PS15935; FINISH IS CLEAN PER PS12030 TYPE II; THROUGH HHOLE CENTER LINE IS 1.00 INCHES FROM FLANGE END WITH A MINIMUM DIAMETER OF 0.156 INCHES AND A MAXIMUN DIAMETER OF 0.162 INCHES; 0.80 INCHES FROM FLANGE END THE INTERIOR DIAMETER STEPS DOWN TO A MINIMUM OF 0.386 INCHES AND A MAXIMUM OF 0.393 INCHES AND HAS A 90 DEGREE COUNTERSUNK WITH A MINIMUM DIAMETER OF 0.626 INCHES AND A MAXIMUM OF 0.656 |
| HEAT | HEAT TREATMENT | HEAT TREATED |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQC530 ALLOY 173 COND H |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.00 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.624 AND INCHES MAXIMUM 0.633 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 1.000 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 68D391161-2011 | 76301 |
| 68D391161 | 76301 |
| 68D391161-2011 | 0PXV4 |