NSN 5905-00-999-7175 · NIIN 009997175 · FSC 5905
NO DASHES 5905009997175
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2497 AND INCHES MAXIMUM 0.250 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.20 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.20 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| FEAT | SPECIAL FEATURES | SUPPLIED WITH ADAPTER |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 92220-537-304-026 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8370 AND INCHES MAXIMUM 0.8375 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.807 AND INCHES MAXIMUM 1.817 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED FRONT END |
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.112 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 40.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.4320 AND INCHES MAXIMUM 1.4420 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.450 AND INCHES MAXIMUM 1.550 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.002 |
Supersedes
This item replaces cancelled NIINs 009120333 · 009119067. An older drawing citing one of those numbers resolves here.