NSN 5305-01-029-7690 · NIIN 010297690 · FSC 5305
NO DASHES 5305010297690
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.637 AND INCHES MAXIMUM 0.750 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.720 AND INCHES MAXIMUM 0.750 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.312 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.190 |
| AAUM | LOCKING FEATURE | THREADS PATCH OR PELLET OR STRIP |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.159 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 155000 |
| MATT | MATERIAL | LOCKING FEATURE PLASTIC POLYAMIDE NYLON |
| MATT | MATERIAL | FASTENER STEEL |
| SFTT | SURFACE TREATMENT | FASTENER CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNRC |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1352 |
Supersedes
This item replaces cancelled NIIN 010260757. An older drawing citing one of those numbers resolves here.