NSN 5305-00-022-7061 · NIIN 000227061 · FSC 5305
NO DASHES 5305000227061
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.207 AND INCHES MAXIMUM 0.225 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE I AND STYLE 2S |