NSN 5430-00-132-6667 · NIIN 001326667 · FSC 5430
NO DASHES 5430001326667
In Stock
TANK,LIQUID STORAGE
Storage Tanks
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARX | INSIDE DIAMETER | INCHES NOMINAL 20.000 |
| ABFF | FURNISHED ITEMS | FITTING AND TOP |
| ABKW | OVERALL HEIGHT | FEET NOMINAL 8.042 |
| ADAV | OVERALL DIAMETER | FEET NOMINAL 21.542 |
| SHPE | SHAPE | CYLINDRICAL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE II |
| ALPM | ASSEMBLY FORM | KNOCKED-DOWN |
| AMQY | INSTALLATION DESIGN | VERTICAL |
| AXGY | MOUNTING METHOD | MANHOLE BOLT |
| AYNY | INSTALLATION LOCATION | ABOVE GROUND |
| BBYK | TOP SHAPE | CONICAL |
| BSSM | TANK CAPACITY | GALLON, US MEASURE 21000.0 |
| BXHJ | LIQUID FOR WHICH DESIGNED | GASOLINE OR OIL |
| BZKX | BOTTOM SHAPE | FLAT |
| CBPS | SHELL MATERIAL THICKNESS | INCHES NOMINAL 0.1350 |
| CBPZ | BOTTOM MATERIAL THICKNESS | INCHES NOMINAL 0.135 |
| CBQC | TOP MATERIAL THICKNESS | INCHES NOMINAL 0.1350 |
| CBQF | MANHOLE TYPE AND QUANTITY | DOME 1 |
| CBQH | MANHOLE LOCATION | LOCATED IN CENTER OF TOP |
| CBQJ | MANHOLE SHAPE | ROUND |
| CBQK | CLEANOUT TYPE | EXTENDED |
| CBQL | CLEANOUT LOCATION | IN SHELL AND ADJACENT TO THE BOTTOM |
| CBQM | CLEANOUT SHAPE | RECTANGULAR |
| CCLP | CLEANOUT INSIDE HEIGHT | INCHES NOMINAL 36.250 |
| CCLQ | CLEANOUT INSIDE WIDTH | INCHES NOMINAL 24.000 |
| CCLR | FITTING TYPE AND QUANTITY | BOLTED FLANGE 5 |
| CCLS | FITTING SIZE | 8 IN.,6 IN.,2 IN.,7 IN.,6 3/4IN. |
| CCLT | FITTING LOCATION | LOCATED ON LOWER PART OF SHELL 3,LOCATED ON TOP OF TANK 2 |
| CCMB | LADDER LOCATION | EXTERIOR AND INTERIOR |
| MATT | MATERIAL | BOTTOM STEEL |
| MATT | MATERIAL | GASKET RUBBER CHLOROPRENE CLASS CR |
| MATT | MATERIAL | SHELL STEEL |
| MATT | MATERIAL | TOP STEEL |
| SFTT | SURFACE TREATMENT | OUTSIDE ENAMEL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 3 COMBINATION RELIEF VALVE AND THIEF HATCH,8 IN.; 2 INLET-OUTLET ASSY,6 IN.; 2 INLET-OUTLET ASSY,8 IN.; 1 PIPE PLUG,1 IN.; 1 VENT VALVE,10 IN.; 1 WATER DRAW-OFF ASSY,2 IN. |
| AFPN | ASSEMBLY METHOD | BOLTED |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-T-10086 | 81349 |