NSN 5905-00-443-9756 · NIIN 004439756 · FSC 5905
NO DASHES 5905004439756
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
49 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 352.5 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.00 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 3.219 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 3.0000 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.750 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 6.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3RD SECTION 9 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION 3RD SECTION -2.0 TO 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00150 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 2.8750 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.500 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.875 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.720 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 18 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 3RD SECTION 60.0 AND 3RD SECTION 90.0 AND 3RD SECTION 120.0 AND 3RD SECTION 150.0 AND 3RD SECTION 180.0 AND 3RD SECTION 210.0 AND 3RD SECTION 240.0 AND 3RD SECTION 270.0 AND 3RD SECTION 300.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AFJN | FRAGILITY FACTOR | RUGGED |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | CUBIC INCHES 5.301 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | MEGOHMS 1ST SECTION 1.500 AND KILOHMS 2ND SECTION 60.000 AND KILOHMS 3RD SECTION 52.000 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |