NSN 5905-00-903-5741 · NIIN 009035741 · FSC 5905
NO DASHES 5905009035741
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.5 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.10 TO 0.10 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.875 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 1080.0 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.660 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.624 AND INCHES MAXIMUM 0.625 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0530 AND INCHES MAXIMUM 0.0730 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.100 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.046 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 0.8750 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6240 AND INCHES MAXIMUM 0.6250 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEFY | SHAFT END PLAY | INCHES 0.0003 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 1080.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.40 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.30 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.543 AND INCHES MAXIMUM 0.577 |