NSN 3020-00-753-2280 · NIIN 007532280 · FSC 3020
NO DASHES 3020007532280
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 40 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.309 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.189 |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 5 OR QUALITY NUMBER 6 |
| FEAT | SPECIAL FEATURES | ONE NUMBER 0 TAPER HOLE LOCATED ON HUB PORTION OF GEAR BETWEEN HUB END AND FACE |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11,T6 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.750 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.561 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.5000 |
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE |