NSN 4720-00-913-1179 · NIIN 009131179 · FSC 4720
NO DASHES 4720009131179
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER MOLDED RUBBER, CHLOROPRENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY LAID STEEL WIRE |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND LIGHT RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM WORKING 24.250 AND INCHES MAXIMUM WORKING 25.750 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING CADMIUM |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.030 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 1.750 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.750 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SPLIT |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SPLIT |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 4000 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.220 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.220 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.406 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.406 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.030 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.750 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY LAID STEEL WIRE |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.560 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.560 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.750 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 12.000 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.031 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.031 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 2.062 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.062 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.750 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIFTH LAYER SPIRALLY LAID STEEL WIRE |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |