NSN 6105-00-609-4160 · NIIN 006094160 · FSC 6105
NO DASHES 6105006094160
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| AGRB | FLAT DEPTH | SECOND END INCHES NOMINAL 0.0200 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AAJV | OVERALL WIDTH | INCHES 3.312 |
| AAJU | OVERALL LENGTH | INCHES 7.094 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES NOMINAL 0.312 |
| ABXQ | FLATTED PORTION LENGTH | SECOND END INCHES NOMINAL 0.6250 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 1.688 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 0.625 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 1.688 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.250 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.625 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.600 |
| CBBL | FEATURES PROVIDED | SINGLE PHASE ADAPTABILITY AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.190 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| FAAZ | PHASE | INPUT SINGLE |
| AASA | THREAD LENGTH | FIRST END INCHES NOMINAL 0.375 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AKCT | SHAFT ROTATION DIRECTION | SECOND END COUNTERCLOCKWISE |
| BKPB | CURRENT RATING METHOD | LOAD |
| AAJT | OVERALL HEIGHT | INCHES 3.312 |
| BTBY | SHAFT END STYLE | |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |