NSN 2530-00-068-3856 · NIIN 000683856 · FSC 2530
NO DASHES 2530000683856
In Stock
ARM,STEERING GEAR
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABFF | FURNISHED ITEMS | SECTOR SHAFT MOUNTING END SERRATED BORE |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.780 |
| CFBW | SMALL END MAJOR DIAMETER | INCHES MINIMUM 1.071 AND INCHES MAXIMUM 1.074 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 80.0 |
| ADGE | BORE LENGTH | INCHES MINIMUM 0.705 AND INCHES MAXIMUM 0.735 |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEGREE,37MINUTES |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/BALL STUD BORE |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | INCHES MINIMUM 4.890 AND INCHES MAXIMUM 4.950 |
| AJLA | TEETH QUANTITY | 36 |
| ABND | TAPER LENGTH | INCHES NOMINAL 1.500 |
| APGF | DESIGN TYPE | OFFSET |
| AGWJ | BORE SMALLEST DIAMETER | INCHES MINIMUM 0.591 AND INCHES MAXIMUM 0.592 |