NSN 5315-00-281-8035 · NIIN 002818035 · FSC 5315
NO DASHES 5315002818035
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3065 AND INCHES MAXIMUM 0.3105 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.521 AND INCHES MAXIMUM 1.541 |
| CTTF | SECOND END OUTER RADIUS | INCHES MINIMUM 0.021 AND INCHES MAXIMUM 0.041 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 0.709 AND INCHES MAXIMUM 0.729 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRDY | FIRST END LOCATION | LONG END |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STYL | STYLE DESIGNATOR | |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| AAGZ | FIRST END STYLE | |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 44.5 AND DEGREES MAXIMUM 45.5 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.021 AND INCHES MAXIMUM 0.041 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.0915 AND INCHES MAXIMUM 0.1115 |
| AAJD | THREAD CLASS | 2A |
| AAHP | SECOND END STYLE |
Supersedes
This item replaces cancelled NIINs 002157233 · 003471605 · 007351080. An older drawing citing one of those numbers resolves here.