NSN 3110-00-495-3307 · NIIN 004953307 · FSC 3110
NO DASHES 3110004953307
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.0937 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.1406 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.3125 |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | SHIELD STEEL COMP 304 OR STEEL COMP 321 OR STEEL COMP 302 OR STEEL COMP 347 |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| FEAT | SPECIAL FEATURES | FILM GREASE WITH 5 TO 7 MG OF SPECIFIED LUBRICANT ALSO VACUUM IMPREGNATE RETAINER WITH MIL-L-6085 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| AGYE | SURFACE FINISH | GROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHIELD FED SPEC ALL MATERIAL RESPONSES QQ-S-766 |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0003 AND INCHES MAXIMUM RADIAL 0.0005 |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
Supersedes
This item replaces cancelled NIINs 014178934 · 000068038. An older drawing citing one of those numbers resolves here.