NSN 3110-01-072-7912 · NIIN 010727912 · FSC 3110
NO DASHES 3110010727912
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.0937 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.0469 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.1562 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0005 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| LBMA | LUBRICATION MATERIAL | OIL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-81846 |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | RETAINER STEEL COMP 410 |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | SNAP RING STEEL COMP 410 |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SNAP RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| STYL | STYLE DESIGNATOR |