NSN 4720-00-349-9070 · NIIN 003499070 · FSC 4720
NO DASHES 4720003499070
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADJS | EXTERIOR COLOR | BLACK |
| THSD | THREAD SERIES DESIGNATOR | FIRST END NPT |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3500.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 58.750 |
| AHNC | CONNECTION STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED TEXTILE YARN |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.500 |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R5-81343 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL PIPE |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 7000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.500 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1750.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 30.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE AIR AND FUEL/OIL, HYDROCARBON AND WATER, FRESH AND HYDRAULIC FLUID |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED TEXTILE YARN |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.500 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.922 |